CompTIA Review

Learn by making a decision

Practice Games

Match a component or build a packet’s journey. Each solo challenge explains your decision, supports retries, and tracks first attempts separately from completion.

What should I practice next?

Topic mission: Next-hop troubleshooting

Practice a diagnostic test, interpret the next hop, and verify a repair. Completion and independent application are tracked separately.

Network+ N10-009 · Routing/addressing/troubleshooting · Solo · 3 objectives. First focused mission; recommendations cover this topic only.

Start next-hop missionReview next-hop notes

Subnet Architect

Network+ N10-009 · Objective 1.7 · IPv4 subnetting and VLSM · Foundation → Applied · Solo

Verified Subnet Detective exercises connect to largest-first VLSM designs, usable interfaces, constraint checks and new transfer challenges. Guided Practice and independent Challenge.

Play Subnet Architect

A+ Core 1 · 220-1201 · Solo

CompTIA A+ Computer Component Match

Identify components, check compatibility and connect symptoms to useful checks.

Computer hardware · Foundation · 8 objectives

Learning objectives
  • Distinguish temporary working memory from persistent storage.
  • Identify the PSU’s AC-to-DC function.
  • Distinguish solid-state storage from mechanical storage and RAM.
  • Use memory generation and form factor to check compatibility.
  • Match an expansion card to the supported slot and stated power constraints.
  • Connect disk-related symptoms to a storage investigation without overdiagnosing.
  • Use diagnostic evidence to prioritize a RAM/installation check.
  • Identify the NIC’s network-connectivity role.
Play Component Match

Network+ · N10-009 · Solo

IP Routing: Follow the Packet

Build a justified packet journey: local delivery, routed delivery, then a different network.

IPv4 routing · Foundation → Applied · 16 objectives

Learning objectives
  • Use the mask to decide local versus remote.
  • Choose the correct ARP target with an empty cache.
  • Distinguish local MAC endpoints from IP endpoints.
  • Explain switching without decrementing IP TTL.
  • Explain frame removal and local IP delivery.
  • Use subnet comparison to choose a gateway.
  • Resolve a local next-hop MAC for a remote IP destination.
  • Construct a frame to the gateway while retaining IP endpoints.
  • Apply longest-prefix match rather than first/default route.
  • Explain router TTL reduction without NAT endpoint changes.
  • Use the selected exit network for address resolution.
  • Explain which link-layer addresses change after routing.
  • Recognize destination delivery and end-to-end IP addresses.
  • Apply a different subnet and a populated ARP cache.
  • Apply longest-prefix match with /26 versus /24 and default.
  • Predict TTL and both address layers on a different network.
Play Follow the Packet

Outage Ops

Cooperative troubleshooting with Guided Demo and existing Twilio rooms. Investigate evidence, diagnose the incident, repair and verify.

A+ / Network+ · Troubleshooting · Applied

Open Outage Ops